In the past CIPPE 2016, GN Solids Control brought its centrifuge family to the show, all the centrifuges from the 9 inch baby centrifuge to the 22 inch big brother centrifuge, standing in a row and visited by many visitors and end users.
Especially the GNLW363 Decanter centrifuge, both the old look one and the new design were shown in CIPPE 2016, and the new one was positioned on a skid. What’s the differences between each generations GNLW363’s?
1, first generation GNLW363, the original design for 14 inch decanter centrifuge, with the two motors on each side of the centrifuge. although the material used is better than others, the centrifuge is still an old looking one.
2, second generation GNLW363B, it is more international looking, as GN Solids Control has been selling its products to many countries and regions in the world, and GN’s products design became more and more international, GNLW363B decanter centrifuge’s motors are located on same side of the centrifuge, it allowed the operators to have more space for operation.
- third generation GNLW363C decanter centrifuge, for outlook, it is similar to GNLW363B, with two motors on one side. But there are more small but useful changes on GNLW363C, because the centrifuge was used for many applications since then, like the oily sludge separation, the dewatering unit and etc, with feedback from jobsites, GN re-designed it and better it a lot.
4, forth generation GNLW363D, the inside design is similar with GNLW363C, but the outlook is quite different, as the structure is more compact and total weight is less, easy for air shipment in case of urgent use.
For the same model of GNLW363D/C decanter centrifuges, GN has optional control panels like fixed speed control panel, VFD control panel of normal one, and the positive pressurized control panel with PLC smart touching screen.
GN 4th Generation of Decanter Centrifuges is a post from: Drilling Mud Decanter Centrifuge
