A .The adjustment of the drum speed.
The adjustment of the bowl speed is performed in manual adjustment or decanter centrifuge plate prescribed maximum working speed following the adjustment.
Different rated speed by installed different size wheel by diameter for driving the main belt wheel to set different drum operation speed
In variable frequency drive decanter centrifuge will paired with control panel that allow increase and decrease the drum speed.
By fine-tuning the speed of the drum, it can perform more precise solids particles separation. It can also improve the wear of the drum, the vibration and the noise to extend the service life of the decanter centrifuge.
The separation purpose or drilling fluid solids content is by the choice drum speed. For instance, barite recovery or processing high-density mud, it is suggested that the low spending speed. For general medium density mud prefer choose medium or high speed. The low density mud is ideal for using high speed decanting centrifuge.
B. The adjustment of the differential drive
Centrifuge differential speed (back drive is also refer by) in its within the prescribed scope of, do not suggest user to adjust and it can only adjust in a small range change the parameters.
Different speed centrifuge adjustment methods are remove the original auxiliary motor pulley, and reloading large diameter or smaller diameter belt wheel Auxiliary motor pulley change the differential input shaft speed enhancement in result of differential speed decreased. On the other hand, it can also cause differential speed increase.
Operators must understand that regular maintenance on the centrifuge such as regular cleaning the inlet and outlet by filling water or diesel depends what kind of fluid it needs process. It is also crucial that add grease to the bearing parts to ensure proper lubrication.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .
GN Solids America LLC’s decanter centrifuge tuning base on condition of operation is a post from: Drilling Mud Decanter Centrifuge
